Step 1: Remove existing faucet aerator (threaded or push-fit).

Step 2: Select and attach the correct adapter (M24 internal, M22 external).

Step 3: Attach filter

Step 4: Switch between tap and purified modes using built-in selector.

Step 5: Flush 1–2 minutes after install before use.

Step 1: Unscrew existing shower head from shower arm.

Step 2: Attach the shower filter to the shower arm by hand, ensure it’s secure.

Step 3: Reattach your shower head to the filter's outlet.

Step 4: Run water through the filter for 1–2 minutes before use.

Step 1: Turn off the water supply or close the valve to your filter system.

Step 2: Remove the used capsule from the filter housing, twist on the model.

Step 3: Unpack the new refill capsule from its sealed packaging.

Step 4: Insert the new capsule into the filter housing, ensuring it’s seated properly and securely.

Step 5: Reassemble the filter housing and turn on the water supply.

Step 6: Flush the filter by running water through it for 1–2 minutes before use to clear any carbon dust or air bubbles.